1. Home
  2. Tridonic LC45
This 45 Watt driver is supplied with a resistor that determines the current strength. It is therefore important that you let us know during the order how many mA the driver should deliver, namely a value between 500 and 1400mA. 2 cover caps with strain relief are supplied as standard.

It is important that you understand that the current value (mA) of your LED affects the power of the output of the driver, you can read all about this in our BLOG

 

OVERVIEW OF CONFIGURATION TRIDONIC_LC45_500_1400mA_PRE2

Tridonic LC45 enters the app with the profile "bDW Driver (dim)". You can also choose other profiles, you will find them under the "PROFILES" tab.

App view Tridonic LC10


Connection voltage 230V
Flow; 350-1050mA
Maximum power; 45W

model 28002414

The table below shows the mA values ​​versus the maximum output power. Note that the driver will operate from 20V;

Suppose you want to work at 700mA, and you connect a 10W LED. The voltage on the LED would then be; 10W / 700mA = 14,3V either; outside of the driver's minimum range.

If you put 2 of those 10W LEDs in series the voltage is; 20W / 700mA = 28,5V and therefore OK.

Current value table Tridonic driver LC45

Here you can see the available profiles of the LC25 from Tridonic. The difference between the first and the second profile is that the push input does not work with the first.

You can change the profile just before adding the dimmer to your network. If you have already added the dimmer to your network and you want to change the profile, you must first disconnect it.

Tridonic LC10 profile selection for Casambi

Tridonic LC45;

LC45 packaging driver Tridonic Casambi


Below is the PDF of the supplier.     PDF not displayed correctly? click here.