1. Home
  2. TCI Maxi Jolly US

TCI Casambi CC driver that continues to deliver strong power even at lower mAmp values. This is because this driver is SELV 120V, or it can offer slightly higher voltages on the output (74V). Nevertheless, the secondary starting voltage is very low (2V), which means that you can achieve correct operation even with little load. The cable length from the driver to the light sources can be long.

It is important that you understand that the current value (mA) of your LED affects the power of the output of the driver, you can read all about this in our BLOG


OVERVIEW OF CONFIGURATION TCI_MAXIJOLLY_US_CASAMBI_DRIVER_127644

TCI Maxijolly US enters the app as follows;

Display TCI-MaxiJolly US 127644 in the Casambi app


Connection voltage 230V

output current; 350-1050mA (adjustable with dip switch)
Maximum power; 60W

The table below shows the mA values ​​versus the maximum output power.

127644 --- DC-MAXI-JOLLY-US-CASAMBI-1
 

This driver is operated in the Casambi app, but you can also connect the push input to control the driver (or something else).

connection diagram TCI Maxijolly SV 127645

Below are some examples of conductor cross-sections recommended by TCI in relation to distance and current strength;

TCI cable cross-section

 

This driver is SELV 60V which means that the output voltage can never exceed 60V.

 

explanation of SELV-TCI

TCI Maxijolly US 127644;

MaxiJolly US-TCI-Casambi


Below is a PDF of the supplier.     PDF not displayed correctly? click here.