1. Home
  2. LIGA.AIR.SP.CUBE

Swisspir LIGA.AIR.SP.CUBE

Swisspir LIGA.AIR.SP.CUBE Casambi motion sensor in an aluminum housing that runs on 2 batteries. By means of a small dip switch on the PCB you can switch off the red light that always lights up when motion is detected, assuming that you would use it in the bedroom, for example. This item can be delivered in an aluminum housing in black, white or anodized aluminum

Note that this sensor can only participate in Evolution networks and sometimes is less suitable for daylight operation, see "MORE INFORMATION".

OVERVIEW OF CONFIGURATION SWISSPIR_LIGA_AIR_SP_CUBE

Swisspir LIGA.AIR.SP.CUBE will enter the app as follows;

Casambi app display SWISSPIR LIGA.AIR.CUBE



Connection voltage; 2 pcs AA battery (included). You can turn off the LED that lights up with movement with a small slide switch on the PCB.

Regarding the LUX measurement; it is measured but only sent to the network during a moment of motion detection. This is because the battery is then spared, after all, the battery would be empty very quickly if it constantly (similar to wired devices) sends information to the network. That is why the DAYLIGHT CONTROL could lead to disappointment, or take this into account and it can work for you.

daylight sensor liga.air.sp.cube



LIGA.AIR.SP.CUBE;

Swisspir LIGA.AIR.SP.CUBE

 

Packing Swisspir LIGA.AIR.SP.CUBE

Below is the PDF of the supplier.     PDF not displayed correctly? click here.

 

 

Optionally, you can also choose from the following aluminum colors, provided you order a minimum of 50. You can submit a price request for this.

Special colors Light team Swisspir LIGA.AIR.SP.CUBE

 

Below we show you how to program a movement sensor LIGA.AIR.SP.CUBE. In the field SENSORS you will find the sensor, of course there may be several sensors. Now click on the LIGA.AIR.SP.CUBE:

Swisspir LIGA.AIR.SP.CUBE programming step 1



You will now see that the sensor is not in use, and since you want to program it, click on that line;

Swisspir LIGA.AIR.SP.CUBE programming step 2



Now click again;

Swisspir LIGA.AIR.SP.CUBE programming step 3



In our example we are now going to program the sensor to activate a pre-made scene with MOTION;

Swisspir LIGA.AIR.SP.CUBE programming step 4



Now click on the line SCENES PRESENCE;

Swisspir LIGA.AIR.SP.CUBE programming step 5



Select the scene (s) to be executed during movement (It is possible to have several scenes executed simultaneously);

Swisspir LIGA.AIR.SP.CUBE programming step 6



Now click on DONE

Swisspir LIGA.AIR.SP.CUBE programming step 7



Click on DONE again;

Swisspir LIGA.AIR.SP.CUBE programming step 8



Click on BACK;

Swisspir LIGA.AIR.SP.CUBE programming step 9



You are now done and you will see your scene under the icon;

Swisspir LIGA.AIR.SP.CUBE programming step 10