Swisspir LIGA.AIR.CUBE.USB Casambi sensor

Swisspir LIGA.AIR.SP.USB is a Casambi ready motion and light sensor that is connected to a USB-C connection. The Cube is made of aluminum and comes in black, white or anodized aluminum. Other trendy colors are available on request. By means of a small dip switch on the PCB you can switch off the red light that always lights up when motion is detected, assuming that you would use it in the bedroom, for example

SWISSPIR-LIGA.AIR.CUBE.USB

LIGA.AIR.CUBE.USB will enter the app as follows;

Casambi app display LIGA.AIR.CUBE.USB

You must connect this sensor with a USB cable. You can turn off the LED that lights up with movement with a small slide switch on the PCB. This device detects movement and also measures the illuminance (Lux).

Regarding the LUX measurement; it is measured but only sent to the network during a moment of motion detection. This is because the battery is then spared, after all, the battery would be empty very quickly if it constantly (similar to wired devices) sends information to the network. That is why the DAYLIGHT CONTROL could lead to disappointment, or take this into account and it can work for you.

Daylight control in the Casambi app for a Liga.air sensor


LIGA.AIR.CUBE.USB is delivered in a cardboard box;

Swisspir LIGA.AIR.SP.CUBE

 


Below is the PDF of the supplier.     PDF not displayed correctly? click here.

 

 

Optionally, you can also choose from the following aluminum colors, provided you order a minimum of 50. You can submit a price request for this.

LIGA_AIR_SP_CUBE_GRUPPE_01-01_201111

 


Below we show you how to program a movement sensor LIGA.AIR.CUBE.USB. In the field SENSORS you will find the sensor, of course there may be several sensors.

Swisspir LIGA.AIR.SP.BAT programming step 1



You will now see that the sensor is not in use, and since you want to program it, click on that line;

Swisspir LIGA.AIR.SP.BAT programming step 2



Now click again;

Swisspir LIGA.AIR.SP.BAT programming step 3



In our example we are now going to program the sensor to activate a pre-made scene with MOTION;

Swisspir LIGA.AIR.SP.BAT programming step 4



Now click on the line SCENES PRESENCE;

Swisspir LIGA.AIR.SP.BAT programming step 5



Select the scene (s) to be executed during movement (It is possible to have several scenes executed simultaneously);

Swisspir LIGA.AIR.SP.BAT programming step 6



Now click on DONE

Swisspir LIGA.AIR.SP.BAT programming step 7



Click on DONE again;

Swisspir LIGA.AIR.SP.BAT programming step 8



Click on BACK;

Swisspir LIGA.AIR.SP.BAT programming step 9



You are now done and you will see your scene under the icon;

Swisspir LIGA.AIR.SP.BAT programming step 10