Lighting team LIGA.AIR.STO.2T.240 Blind actuator for Casambi networks

In the Casambi app, this device can operate your sun blinds, curtains, patio cover or, for example, your pool cover. There are also 2 potential-free inputs available for push-buttons so that you can also operate the outputs locally.

OVERVIEW OF CONFIGURATION_Lichtteam LIGA.AIR.STO.2T.24Storen shutter relay

Light team LIGA.AIR.STO.2T.240 ends up in the Casambi app as follows;


You connect to 230V and then you have 2 outputs that switch 230V on the black and white outgoing (thick) wires. The maximum current is 3A per output.



If you offer 230VAC at the entrance, the unit is actually ready for use immediately without needing the Casambi app at all. The push-buttons that may be connected to the green and red wire work directly, with black being the common wire. These wires are galvanically isolated and can therefore also be connected with small push buttons. Below is a timeline that explains how the push-buttons control the outputs.

Programming LIGA.AIR.STO.2T.240-PART1

Of course you will teach this blind actuator in the Casambi app and the operation of the pushbuttons in the app will fulfill the same function. The wired push-buttons and the push-buttons in the Casambi app can be used simultaneously;

Programming LIGA.AIR.STO.2T.240-PART2

You can also directly control the bottom sliders, which results in the following operation;

Programming LIGA.AIR.STO.2T.240-PART3

Lighting team LIGA.AIR.STO.2T.240;

Delivery_Light team LIGA.AIR.STO.2T.240


Below is a PDF of the supplier.     PDF not displayed correctly? click here.