You can reach the dimmer both via the Casambi network and possibly via a push button that you can connect to the dimmer. You will of course also find this input at the switches in the app.

Inductive, ohmic and capacitive loads may be connected, but not a mix thereof. During commissioning, the lights will flash a number of times and the dimmer will adjust to the correct power factor, namely Ohms, Capacitive or Inductive.

There are many useful parameter and sensor fields visible in the Casambi app. An overview and explanation about this can be found in the separate tab below.


Maintronic, the original PDF from the manufacturer / open in browser
Maintronic, PDF introduction / open in browser
Maintronic, Calibration PDF / open in browser
Maintronic sensor and Parameter PDF / open in browser