1. Home
  2. LIGA.AIR.2REL.240

Waterproof Casambi block with 2 potential-free changeover contacts. You can operate both contacts separately in the Casambi app. The supply voltage of LIGA.AIR.2REL.240 is 230V.

OVERVIEW OF CONFIGURATION LIGA_AIR_2REL_240

LIGA.AIR.2REL.240 is displayed in the Casambi app as follows;

Casambi-APP-rendering-of-LIGA.AIR

The connection voltage is 230V, whereby you have two separately potential-free switchable changeover contacts available in the Casambi app. Each contact may be connected up to 230V and not exceed a current of 10A.

connection diagram_lichtteam liga.air.2rel.240

You can therefore connect the contacts with foreign voltages, but you could also switch the 230V directly, for example;

connection diagram_lichtteam liga.air.2rel.240-2


You can choose from 5 profiles;

By default, this device comes with the profile "240";
If you click on the icon in the lamp field, both outputs will switch on or off at the same time. However, if you keep pressing the icon for a moment, the field below will open where you can switch both outputs separately. Attention please; if you switch ALL LAMPS in the lamp field of the app or on a switch, the outputs of this device WILL switch.

The next profile you can choose is "S";
If you click on the icon in the lamp field, nothing will happen. However, if you keep pressing the icon for a moment, the field below will open where you can switch both outputs separately. Attention please; if you switch ALL LAMPS in the lamp field of the app or on a switch, the outputs of this device will NOT switch.

The following profile is "S + T";
If you click on the icon in the lamp field, nothing will happen. However, if you keep pressing the icon for a while, the field below will open where you can switch the first output on and off. You can use the following output as a push-button either; 'as long as you keep pressing the push button, the contact is closed'. Attention please; if you switch ALL LAMPS in the lamp field of the app or on a switch, all outputs of this device will NOT switch.

Then we now come to profile "TExplanation;
If you click on the icon in the lamp field, nothing will happen. However, if you keep pressing the icon for a moment, the field below will open. Both outputs behave as push-buttons either; 'as long as you keep pressing the push button, the contact is closed'. Attention please; if you switch ALL LAMPS in the lamp field of the app or on a switch, all outputs of this device will NOT switch.

Finally you can choose profile "T.1sExplanation;
If you click on the icon in the lamp field, nothing will happen. However, if you keep pressing the icon for a moment, the field below will open. Both channels behave like "1 second" output, which means that if you give a short click, the output switches for 1 second. If you press the push button for longer than 1 second, the output will still switch for 1 second. Attention please; if you switch ALL LAMPS in the lamp field of the app or on a switch, all outputs of this device will NOT switch.

Remember that you can also connect outputs to, for example, Enocean switches or Xpress. This also applies to the pulse outputs and even the 1 sec. outputs.

Casambi Profile Selection LIGA.AIR.2REL.240



LIGA.AIR.2REL.240;

league.air.2rel.240
.
Delivery-Liga.air.2rel.240-p


Below is the PDF of the supplier.     PDF not displayed correctly? click here.