1. Home
  2. LEDsGO PowerPWM

Powerful LED driver from Connected Light that also fits on a DIN rail. There are several profiles available such as RGB, RGBW, TW, etc. An input is available to connect a push button. Maximum connected power on 24VDC; 380W. If you need a 24V power supply, you will find it in our Snappy collection.

OVERVIEW OF CONFIGURATION LEDSGO 4CH DIMMER CONNECTED LIGHT CASAMBI

Ledsgo Power PWM 4 channel is displayed in the Casambi app as follows;

App-display-Ledsgo-Power-PWM-4-Channel

Connection voltage 12-24VDC
Maximum current per channel 4A
Maximum total power 380 watts

This LED strip driver has the special feature that the 4 outputs of each 4A can all be fully loaded at the same time, so 96W per output (at 24VDC). This device also has an input for a push-button.

If you are going to put a full load on this driver, please connect both + and - INPUTS to the power supply so that the TOTAL current is divided between the power supply terminals. Advice; look at the tab page "CONNECTION EXAMPLE", and note that also on the output side you make a parallel connection to the common + to distribute the current over the contacts.


Connection diagram POWER PWM Ledsgo 4 channel driver


Several profiles are available for Ledsgo Power PWM;

Casambi Profile Selection Power PWM 4 Channel Ledsgo


LEDsgo Power PWM;

Power-PWM-4-Channel-Ledsgo

Below is the PDF of the supplier.     PDF not displayed correctly? click here.

 


Below is a PDF that we signed as advice for one of our customers. If you are going to put a full load on this driver, please connect both + and - INPUTS to the power supply so that the TOTAL current is divided between the power supply terminals. Note that also on the output side you make a parallel connection to the common + to distribute the current between the contacts.     PDF not displayed correctly? click here.