Eldoled Solodrive 50W Casambi driver

This 50W driver has 2 outputs that dim up and down simultaneously, whereby the dimming power can be reduced to even 0,1%. After we know your wishes regarding the desired current value (mA), we will configure the driver for you here. The amperage may be between 150mA and 1400mA. You must choose a so-called Casambi radio. You will find the radios in the "RADIOS" tab. All radios work the same, only the construction is different.

It is important that you understand that the current value (mA) of your LED affects the power of the output of the driver, you can read all about this in our BLOG

OVERVIEW OF CONFIGURATION ELDOLED_SOLODRIVE_50W_CASAMBI

Eldoled SOLO 50W enters the lamp field as follows;

app display eldoled soldrive 50w

You may work with quite long wires from the driver to the LED load, depending on the wire cross-section;
2 x 0,5 / up to 14 meters
2 x 0,8 / up to 22 meters
2 x 1,0 / up to 28 meters
2 x 1,5 / up to 36 meters

After we know your wishes regarding the desired current output, we will configure the driver here and deliver it. The current strength may be between 150mA and 1400mA, adjustable per mA (888mA is also allowed, for example). This driver works on the output between 2 and 55V. The channels may be set separately, eg channel 1; 350mA / channel 2; 750mA. You must choose a so-called Casambi radio. You will find the radios in the "RADIOS" tab. All radios work the same, only the construction is different.

ELDO-led Casambi driver SOLO 50W CONNECTION DIAGRAM

When ordering you can indicate whether you want a linear or logarithmic dimming curve;

Dimming curve EldoLed Dualdriver


EldoLed Solo driver 50W;

DELIVERY-eldoled-soldrive-50W-CASAMBI

Below is the PDF of the supplier. PDF not displayed correctly? click here.

 

 

Below is a PDF from the supplier pertaining to the radios.     PDF not displayed correctly? click here.


This EldoLed driver works together with a Casambi radio type "5400". This radio is connected with the brown and yellow wire. There are different versions;

Radio BT-L2C1
This radio has an external antenna. For example, you can place the radio in a closed metal profile and stick the transceiver on the outside of the profile to ensure that the Casambi signal is properly received and transmitted. There is already adhesive foil on the antenna.

Radio BT-L1C1
This radio has a built-in antenna and you can place it near the driver, for example above the ceiling.

Radio BT-S1C1
You can place this radio in a gyproc or other suspended ceiling, for example. To do this, drill a 22 mm hole.

See also the PDF below the image.

EldoLed radio LED code BLE Casambi