Danlers CBU-HBND-IP66 Casambi sensor

Danlers CBU-HBND-IP66 is a narrow and far-sighted motion sensor for Casambi Bluetooth networks. The version is an IP66 cable box. After you add the sensor to the network, various commands can be executed for movement or a certain illuminance.


Danlers CBU-HBND-IP66 reports as follows in the Casambi app;

APP-VIEW-danlers-cbu-hbnd-ip66 - for-Casambi

You connect to 230VAC. In the Casambi app you can link scenes to the motion sensor and you can see if there is movement. The current Lux value is always displayed and can be used in DAYLIGHT CONTROL;


Below is the PDF of the supplier. PDF not displayed correctly? click here.


Below we show you how to program a motion sensor Danlers CBU-HBND-IP66. In the field SENSORS you will find the sensor, of course there may be several sensors.

programming a danlers cbu-hbnd-1

You will now see that the sensor is not in use, and since you want to program it, click on that line;

programming a danlers cbu-hbnd-2

Now click again;

Swisspir LIGA.AIR.SP.CUBE programming step 3

In our example we are now going to program the sensor to activate a pre-made scene with MOTION;

Swisspir LIGA.AIR.SP.CUBE programming step 4

Now click on the line SCENES PRESENCE;

Swisspir LIGA.AIR.SP.CUBE programming step 5

Select the scene (s) to be executed during movement (It is possible to have several scenes executed simultaneously);

Swisspir LIGA.AIR.SP.CUBE programming step 6

Now click on DONE

Swisspir LIGA.AIR.SP.CUBE programming step 7

Click on DONE again;

Swisspir LIGA.AIR.SP.CUBE programming step 8

Click on BACK;

programming a danlers cbu-hbnd-3

You are now done and you will see your scene under the icon;

programming a danlers cbu-hbnd-4