Danlers CBU-COPD17M-IP66 Casambi sensor

Danler's CBU-COPD17M-IP66 is a 'far-looking' daylight and motion sensor. In the Casambi app you can link scenes to the motion sensor and you can see if there is movement, this also works via the 'remote' gateway.

overview-DANLERS-CBU-COPD17M

Danlers Casambi CBU-COPD17M enters the SENSORS field as follows;


app display casambi danlers cbucopd17m


You connect to 230VAC. In the Casambi app you can link scenes to the motion sensor and you can see if there is movement. The current Lux value is always displayed and can be used in DAYLIGHT CONTROL.


DANLERS-CBU-COPD17M

Danlers CBU-COPD17M;

cbu-copd-17m DANLERS



cbu-copd-17m-2-DANLERS


Below is the PDF of the supplier. PDF not displayed correctly? click here.

 

Below we show you how to program a motion sensor from Danlers type CBU-COPD17M. In the field SENSORS you will find the sensor;

operation-danlers-cbu-copd17m-1



You will now see that the sensor is not in use, and since you want to program it, click on that line;

operation-danlers-cbu-copd17m-2



Now click again;

Swisspir LIGA.AIR.SP.CUBE programming step 3



In our example we are now going to program the sensor to activate a pre-made scene with MOTION;

Swisspir LIGA.AIR.SP.CUBE programming step 4



Now click on the line SCENES PRESENCE;

Swisspir LIGA.AIR.SP.CUBE programming step 5



Select the scene (s) to be executed during movement (It is possible to have several scenes executed simultaneously);

Swisspir LIGA.AIR.SP.CUBE programming step 6



Now click on DONE

Swisspir LIGA.AIR.SP.CUBE programming step 7



Click on DONE again;

Swisspir LIGA.AIR.SP.CUBE programming step 8



Click on BACK;

operation-danlers-cbu-copd17m-3



You are now done and you will see your scene under the icon;

operation-danlers-cbu-copd17m-4