Danler's CBU-CESR Casambi sensor

Danlers CBU-CESR is a 230V surface-mounted motion and brightness sensor for Casambi networks. In the Casambi app you can link scenes to the motion sensor and you can see if there is movement. You place this sensor at a height of 2,5-5 meters.

overview-DANLERS-CBU-CESR-Casambi

Danler's CBU-CESR is listed in the SENSORS field as follows;


working-danlers-cbu-CESR-for-Casambi


You connect to 230VAC, in the Casambi app you can link scenes to the motion sensor and you can see if there is movement. The current Lux value is always displayed and can be used in DAYLIGHT CONTROL.

Casambi DAYLIGHT CONTROL


Danler's Casambi CBU-CESR;

DANLERS-CBU-CESR

DANLERS-CBU-CESR-2


Below we show you how to program a motion sensor Danlers CBU-CESR. In the field SENSORS you will find the sensor, of course there may be several sensors.

PROGRAMMING danlers-cbu-CESR-for-Casambi-1



You will now see that the sensor is not in use, and since you want to program it, click on that line;

PROGRAMMING-danlers-cbu-CESR-for-Casambi-2



Now click again;

Swisspir LIGA.AIR.SP.CUBE programming step 3



In our example we are now going to program the sensor to activate a pre-made scene with MOTION;

Swisspir LIGA.AIR.SP.CUBE programming step 4



Now click on the line SCENES PRESENCE;

Swisspir LIGA.AIR.SP.CUBE programming step 5



Select the scene (s) to be executed during movement (It is possible to have several scenes executed simultaneously);

Swisspir LIGA.AIR.SP.CUBE programming step 6



Now click on DONE

Swisspir LIGA.AIR.SP.CUBE programming step 7



Click on DONE again;

Swisspir LIGA.AIR.SP.CUBE programming step 8



Click on BACK;

PROGRAMMING-danlers-cbu-CESR-for-Casambi-3



You are now done and you will see your scene under the icon;

PROGRAMMING-danlers-cbu-CESR-for-Casambi-4