Casambi CBU-ASD is standard in the app with the profile "DALI-1 x DIM (AO). You can also choose other profiles, you will find them under the tab 'PROFILES'.
Maximum current on the DALI bus or 0-10V bus; 1 driver.
A frequently asked question is about the 0-10V output. At 0% dimming value, this is 0 Volt. Many drivers, however, do not switch the LEDs off completely at 0 Volt and that is what the 230V auxiliary contact from CBU-ASD is intended for. With that contact (which is designed as a transistor output) you can release a 230V relay at 0 Volt output. The relay can supply your drivers with 230V. You may not supply 230V drivers directly from the auxiliary contact of CBU-ASD. You will find suitable 230V relays in our CASAMBI ACCESSORIES.
If you set this unit to DALI, and no Dali drivers are connected, a 'configuration error' will appear after a while. This is because CBU-ASD is trying to make contact on the bus and thus fails.
Please convert profiles without outgoing wiring.
Here you can see the (many) available profiles of the Casambi inverter CBU-ASD. The dimmer comes standard with the DALI-1xDIM- (AO) profile.
You can change the profile of CBU-ASD just before adding it to your network. If you have already added CBU-ASD to your network and you want to change the profile, you must first disconnect it, see the TUTORIAL tab where a Youtube is located.
Casambi CBU-ASD is supplied as follows;
Below is a PDF of CBU-ASD. PDF not displayed correctly? click here.