AIMOTION Gateway for Casambi

AIMOTION Casambi gateway runs on Android firmware. You must temporarily connect a mouse and keyboard via the 2 USB ports and you also temporarily connect a screen via HDMI. You now need to set everything up and set the GATEWAY to ON in the Casambi network. Afterwards you can switch and dim your lights from the outside.

In the Casambi app you can turn on the GATEWAY;

programming Casambi Holders Gateway-1
.
programming Casambi Holders Gateway-2
.
programming Holders Gateway-3

You must temporarily connect a mouse and keyboard via the USB ports and you also temporarily connect a screen via HDMI. After you have access to the AIMOTION Gateway, you can connect it to your WIFI network and/or via the Ethernet cable.

You can now open the already installed Casambi app and log in to your Casambi network. In the network, set the GATEWAY to ON. Afterwards you can switch and dim your lights from outside.

Please note that you CANNOT somewhere else set the gateway to 'on' again, because then the functionality on AIMOTION Gateway will disappear!

You may add another Bluetooth Casambi network in the AIMOTION Gateway, up to 2 in total.

Because the AIMOTION gateway is always connected to the internet, the current time will be re-entered into the network after power is restored. When returning after a power failure, the Casambi app will be restarted automatically.

 

Pack-Holders-Gateway