1. Home
  2. CONSTANT CURRENT DRIVERS
  3. Tridonic LC25
Previous product | Next product
This 25 Watt driver is supplied with a resistor that determines the current strength. It is therefore important that you let us know during the order how many mA the driver should deliver, namely a value between 350 and 1050mA. 2 cover caps with strain relief are supplied as standard.

It is important that you understand that the current value (mA) of your LED affects the power of the output of the driver, you can read all about this in our BLOG


OVERVIEW OF CONFIGURATION TRIDONIC LC25 DRIVER BWD CASAMBI


Tridonic LC25 enters the app with the profile "bDW Driver (dim)". You can also choose other profiles, you will find them under the tab "PROFILES".

App view Tridonic LC10


Connection voltage 230V
Flow; 350-1050mA
Maximum power; 24W

model 28002413

The table below shows the mA values ​​versus the maximum output power. Note that the driver will operate from 20V;

Suppose you want to work at 700mA, and you connect a 10W LED. The voltage on the LED would then be; 10W / 700mA = 14,3V either; outside of the driver's minimum range.

If you put 2 of those 10W LEDs in series the voltage is; 20W / 700mA = 28,5V and therefore OK.

Selection table driver Tridonic LC25 amperage

Here you can see the available profiles of the LC25 from Tridonic. The difference between the first and the second profile is that the push input does not work with the first.

You can change the profile just before adding the dimmer to your network. If you have already added the dimmer to your network and you want to change the profile, you must first disconnect it.

Tridonic LC10 profile selection for Casambi

Tridonic LC25;

LC25 Tridonic packaging

Below is the PDF of the supplier.     PDF not displayed correctly? click here.