EldoLed Dualdrive 560 / A ends up in the app as Tunable White as follows;
Output current; (by us) adjustable between 150 and 1400 mA
Maximum power; 50W (It is meant that you have, for example, an LED load that has 50W cool and 50W warm share)
After we know your wishes regarding the desired current value (depending on your LED, eg 500mA), we configure the driver for you.
The current strength may be between 150mA and 1400mA, adjustable per mA (888mA is also allowed, for example). This driver works per channel between 1,5 and 55V and is completely flicker-free so that the driver can even be used in film recording studios.
However, if you connect a Tunable White load of, for example, 80W, this could be because with fully warm light there is 40W on channel 1, and with completely cold light 40W on channel 2. You can of course check this yourself.
You may work with very long wires from the driver to the LED load, depending on the wire cross-section;
2 x 0,5 / up to 14 meters
2 x 0,8 / up to 22 meters
2 x 1,0 / up to 28 meters
2 x 1,5 / up to 36 meters
When ordering you can indicate whether you want a linear or logarithmic dimming curve;
EldoLed Dualdrive TUNABLE WHITE;
Below is the PDF of the supplier. PDF not displayed correctly? click here.
This EldoLed driver works together with a Casambi radio type "5403". This radio is connected with the brown and yellow wire. There are different versions;
Radio BT-L2C1
This radio has an external antenna. For example, you can place the radio in a closed metal profile and stick the transceiver on the outside of the profile to ensure that the Casambi signal is properly received and transmitted. There is already adhesive foil on the antenna.
Radio BT-L1C1
This radio has a built-in antenna and you can place it near the driver, for example above the ceiling.
Radio BT-S1C1
You can place this radio in a gyproc or other suspended ceiling, for example. To do this, drill a 22 mm hole.
See also the PDF below the image.
