Attention! Only the quadruple faceplates below are applicable to this product!
* If you don't know how to add Enocean switches to your Casambi network, please see first this youtube
Connect with
After the Enocean switch has been added to your Casambi network, you can give the switch a name, e.g. "Switch next to stairs". You can link lamps, elements, scenes, groups, etc. to each button. The faceplate you choose affects the operation;
Four push buttons (factory-finished)
* Suppose: to button 1 you link 'kitchen lamp' and to the other 3 buttons'Something else'.
A short press of button 1 switches the kitchen lamp on, another short press switches it off again. If you keep pressing button 1, you dim the kitchen lamp, release it and then keep pressing it again, the kitchen lamp dims down.
Two toggle switches
A short press of button 1 switches the kitchen lamp on, another short press switches it off again. If you keep pressing button 1, you dim the kitchen lamp, release it and then keep pressing it again, the kitchen lamp dims down.
Two toggle switches
* Suppose: to button 1 you link 'Outdoor lights' and on button 2 'Group 2'.
A short press of button 1 at the top switches on the Exterior lights, a short press of button 1 at the bottom switches them off. If you continue to press button 1 at the top, you dim the exterior lights, if you continue to press button 1 below, you dim the exterior lights. Group 2 is operated in the same way on button 2.
A short press of button 1 at the top switches on the Exterior lights, a short press of button 1 at the bottom switches them off. If you continue to press button 1 at the top, you dim the exterior lights, if you continue to press button 1 below, you dim the exterior lights. Group 2 is operated in the same way on button 2.
Two push buttons
* Suppose: to button 1 you link 'All lamps' and on button 2 'terrace heater'.
A short press of button 1 switches All lamps on, a further short press of button 1 switches them off again. If you keep pressing, you dim up, release and then keep pressing again, you dim down. A short press of button 2 switches the Terrace heater on, a subsequent press switches it off again.
A short press of button 1 switches All lamps on, a further short press of button 1 switches them off again. If you keep pressing, you dim up, release and then keep pressing again, you dim down. A short press of button 2 switches the Terrace heater on, a subsequent press switches it off again.
One toggle switch
* Suppose you link 'Eat scene'.
A short press above switches the scene on, a short press below switches the scene off. If you continue to press, the scene will dim up to the maximum value set in the scene, release and then continue to press again, you will dim the scene down.
A short press above switches the scene on, a short press below switches the scene off. If you continue to press, the scene will dim up to the maximum value set in the scene, release and then continue to press again, you will dim the scene down.
Two buttons, one toggle switch
* Suppose you link a scene to button 1 'Watch TV' and on button 2 an element 'garden shed'.
The left side of the rocker acts as an on-off switch. Suppose you give a short press on button 1, the Watching TV scene switches on, but the right side of the rocker also immediately becomes the dimmer for that scene. If you then give button 1 a short press again, the Watching TV scene will go out again. Suppose that immediately after this - or in between - you give a short press on button 2, then the Garden house will turn on (or off), and the right side of the rocker will become the dimmer for the Garden house. The right side of the seesaw will therefore always become the dimmer of the last selected button on the left.
by briefly pressing button 1 By means of a short press on button 1 you select the scene Watch TV and you can switch and dim with + and - on the right. With a short press on button 2 you select the Garden house, you can switch on the right with + and -.
The left side of the rocker acts as an on-off switch. Suppose you give a short press on button 1, the Watching TV scene switches on, but the right side of the rocker also immediately becomes the dimmer for that scene. If you then give button 1 a short press again, the Watching TV scene will go out again. Suppose that immediately after this - or in between - you give a short press on button 2, then the Garden house will turn on (or off), and the right side of the rocker will become the dimmer for the Garden house. The right side of the seesaw will therefore always become the dimmer of the last selected button on the left.
by briefly pressing button 1 By means of a short press on button 1 you select the scene Watch TV and you can switch and dim with + and - on the right. With a short press on button 2 you select the Garden house, you can switch on the right with + and -.
Dimmer and temperature (note: this function is signed in the traffic app)
* Suppose you link the 'Tunable white lamp'.
A short press of button 1 at the top switches the lamp on, a short press of button 1 at the bottom switches the lamp off. If you keep pressing button 1 at the top, you dim the lamp, if you keep pressing button 1 at the bottom, the lamp dims down. On the right you can adjust the color from warm light to cold light (K value).
A short press of button 1 at the top switches the lamp on, a short press of button 1 at the bottom switches the lamp off. If you keep pressing button 1 at the top, you dim the lamp, if you keep pressing button 1 at the bottom, the lamp dims down. On the right you can adjust the color from warm light to cold light (K value).
Switch off dimming (adjustable per button)
This is a useful choice to prevent previously created scenes from being adjusted and therefore showing a different light image the next time. The choice is only visible if you link a scene, for example if you link a group to another button, the choice is not visible there.
Use on-off switch (adjustable per Enocean switch)
Use on-off switch (adjustable per Enocean switch)
If you enable this option, the function of 'short pulse on / short pulse off' will no longer apply to all buttons. The ability to continue dimming persists. If you use this function together with 'switch off dimming', a situation may arise such as;
button 1=scene 25% // button 2=scene 50% // button 3=scene 100% // button 4=scene OFF
button 1=scene 25% // button 2=scene 50% // button 3=scene 100% // button 4=scene OFF
Replace device
This tool applies to almost all Casambi devices, including the Enocean switches. Example; Your Enocean switch is linked to all kinds of scenes and groups, but you are out of luck and the switch breaks or your Enocean remote control is lost. If you then click on this line, you can immediately teach in a new one, in which all the settings of the old ones are taken over, except for the name of the switch, which you must enter again.