1. Home
  2. SWITCH CONTACTS
  3. LIGA.AIR.OD.2REL.240
Previous product | Next product

LIGA.AIR.OD.2REL.240+ Casambi double contact from Lichtteam

This relay module consists of the base module LIGA.AIR.OD.2REL.240+ and a separate antenna. The basic module is encased in a black polycarbonate housing and is directly connected to 100-240 VAC. 

The output contains two separate relay contacts that can be switched independently of each other, each with a maximum load of 2 Amps. Both contacts have 1 common input.

The detachable and cast-in antenna is connected to the basic module by means of a waterproof M8.

Various extension cables are optionally available.

OVERVIEW-OF-CONFIGURATION---LIGA.AIR.OD.2REL

 

You can choose from 5 profiles;

By default, this device comes with the profile "240";
If you click on the icon in the lamp field, both outputs will switch on or off at the same time. However, if you keep pressing the icon for a moment, the field below will open where you can switch both outputs separately. Attention please; if you switch ALL LAMPS in the lamp field of the app or on a switch, the outputs of this device WILL switch.

The next profile you can choose is "S";
If you click on the icon in the lamp field, nothing will happen. However, if you keep pressing the icon for a moment, the field below will open where you can switch both outputs separately. Attention please; if you switch ALL LAMPS in the lamp field of the app or on a switch, the outputs of this device will NOT switch.

The following profile is "S + T";
If you click on the icon in the lamp field, nothing will happen. However, if you keep pressing the icon for a while, the field below will open where you can switch the first output on and off. You can use the following output as a push-button either; 'as long as you keep pressing the push button, the contact is closed'. Attention please; if you switch ALL LAMPS in the lamp field of the app or on a switch, all outputs of this device will NOT switch.

Then we now come to profile "TExplanation;
If you click on the icon in the lamp field, nothing will happen. However, if you keep pressing the icon for a moment, the field below will open. Both outputs behave as push-buttons either; 'as long as you keep pressing the push button, the contact is closed'. Attention please; if you switch ALL LAMPS in the lamp field of the app or on a switch, all outputs of this device will NOT switch.

Finally you can choose profile "T.1sExplanation;
If you click on the icon in the lamp field, nothing will happen. However, if you keep pressing the icon for a moment, the field below will open. Both channels behave like "1 second" output, which means that if you give a short click, the output switches for 1 second. If you press the push button for longer than 1 second, the output will still switch for 1 second. Attention please; if you switch ALL LAMPS in the lamp field of the app or on a switch, all outputs of this device will NOT switch.

Remember that you can also connect outputs to, for example, Enocean switches or Xpress. This also applies to the pulse outputs and even the 1 sec. outputs.

Below is the PDF of the supplier.     PDF not displayed correctly? click here.